England Gas Stove was established and run by a company which firmly trusts the philosophy of “Do it yourself”. In every aspect of life self help is the best help. It is one of the major reasons you find this stove in “Do it yourself” shops. It is fabricated and designed in such simple fashion, that you can maintain it with fundamental paraphernalia and care. When you log in to their site you can watch the streaming video, explaining how to install and maintain the gas stove. The troubleshooting segment in the website solves many basic problems if you encounter any.
Renewable source of Energy
This gas stove runs on pellet heating. Pellets are renewable source of energy as equivalent to oil and gas heating system. Call the company`s agent to check and verify the installation. Before you put pellet in the stove, test it for twenty minutes. The unit will automatically switched off when the stipulated time period is over. Use dry and high quality pellets for optimum heating. The unit need regular cleaning as pellet combustion makes the stove soiled. Pellet heating can be used for single oven appropriate for particular room, or for central heating system.
Installation process
While installing the gas stove strictly follow the manual. U.L approved three inch pellet vent lock pipe must be used while installing this heating unit. As a precautionary measure, fasten the connections with a high temperature silicon, though it is interlocking by design. To lock the pipe and to the exhaust blower of the unit use at least three screws. U.L permitted pellet vent pipe can be used instead U.L approved lock pellet pipe.
Maintenance
To work this heating unit appropriately, you must allow air to flow in for ignition. Metal pipes, aluminum, copper or steel pipes should be used for free flow of air. To lock the pipe, use aluminum tape or clamp. The facade end must be netted to avoid outside specks to enter in the heating unit. For smooth air flow the bend number should be minimized.
For optimized heating keep the combustion area free from scab. Remove ash from the area on regular basis. Both sides of the flame spot are for storage of ash. The air openings of the ignition spot must be clean for efficient and effectual heating. As pellets as flammable, keep it safe distance away from the heating system to avoid fortuitous fire. For your safety and for all members of your family install smoke and carbon monoxide detectors. This is how England stove works.
